can evga precision x auto overclock work with over cards

It seemed efficient in both power and temperature. It did not consume a ton of power to achieve the overclock. Power utilization followed a linear trajectory, nothing out of the ordinary. We managed to get it up to 17GHz, which isn’t bad, but we did want more. To alleviate this, you want as high of a memory overclock as you can get. The video card is memory bandwidth starved. While it has an amazing 12GB of VRAM, it is ultimately constrained by the 192-bit bus width and 360GB/s of bandwidth. You see, the memory bandwidth is the one constraint on this video card. On the memory side of things we also achieved an ok overclock, though we did wish it would overclock higher.

That’s a 10% overclock from the baseline of the default operation or an 18% difference from the reference spec of 1777MHz. With a +200 offset the GPU actually ran at an average of 2094MHz, and we peaked higher.

Therefore that was our baseline for overclocking. Ours managed to run at 1897MHz without even touching anything. Remember, this card really has a GPU Boost clock set at 1777MHz, but in reality, it runs much higher, to begin with, out-of-the-box. This resulted in a near 200MHz increase from the default GPU Boost. With Precision X1 we managed to overclock the GPU to an offset of +200. There are many other features built into Precision X1 that will help you overclock the video card, such as Boost Lock and Hardware Monitoring. We were able to increase the Power Target by 12%, control fans individually, set fan curves, and even play with Voltage. It provided all the controls we needed to make an overclock successfully. Overclocking the EVGA GeForce RTX 3060 XC BLACK GAMING was made easy with EVGA’s Precision X1 software.

Can evga precision x auto overclock work with over cards